1 1

Onix-Marble

MP90 ECO XTREME - EXTREME ECO-COMPATIBLE WATER AND OIL-REPELLENT PROTECTION

MP90 ECO XTREME - EXTREME ECO-COMPATIBLE WATER AND OIL-REPELLENT PROTECTION

LE 16,700.00 EGP
LE 16,700.00 EGP
Sale Sold out
Shipping calculated at checkout.
Size

WHAT'S IT FOR

  • Water- and oil-repellent with natural finish.
  • The best environmentally-friendly stain protection for porcelain tiles, natural stone, marble and granite with polished, brushed and matt smoothed finishes.
  • Reduces absorption without affecting the material’s natural look.
  • It waterproofs, protects and facilitates cleaning.
  • It is also ideal for grouting joints, ceramic and crackle effect surfaces, grit, resinmarble, and stone slabs.
  • Is also suitable for treating coloured cement tiles and manufactured stones.
  • It provides an anti-graffiti protection that prevents graffiti paint from bonding to surfaces. It speeds the cleaning process because graffiti can be easily removed. 
  • Water- and oil-repellent: it hampers the absorption of common watery and oily stains.

ADVANTAGES
  • Free of hydrocarbon solvents: eco-friendly treatment
  • Being a water-based product, it withstands residual humidity conditions and can therefore be applied 24–48 hours after the initial wash, thus speeding up the treatment
  • Single-coat application: apply the product and rub it gently over the surface until it is completely absorbed • Does not form surface film and does not yellow
  • Ideal for protecting tables, as well as kitchen and bathroom tops
  • The surface can be walked on after just 2 hours
  • A product with an extremely low VOC and a low environmental impact; it also has the INDOOR AIR COMFORT GOLD certificate
**Application conditions: temperature = 20°C • humidity < or = 60% Apply according to the indications shown on the label.

       

      HOW TO USE IT:

      No dilution required: ready to use.

      Application: Shake before use. For materials with matt finish (natural stone, terracotta, agglomerates, concrete tiles): Apply MP90 ECO XTREME evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries. On highly absorbent materials, apply two coats of product with a 20-minute interval in between.

      For polished porcelain tiles, natural stone, agglomerates with glossy finish: Apply MP90 ECO XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub it using a microfibre cloth wetted with the product to favour its penetration. Dry the surface with a clean cloth. To speed up the process, it is possible to treat the surface with a single-disc floor scrubber.

      To complete the cycle with the finish: On porous materials such as natural stone, reconstructed tiles, agglomerates and concrete tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (MATT, SATIN, CLASSIC, LONGLIFE). The surface can be walked on after just 2 hours. Water- and oil-repellent protection takes effect after 24 hours.

      Maintenance: use a diluted solution of CLEANER PRO.

       

      Caution: Before applying to the entire surface, test the product on a small area to check for colour changes. Do not apply the product externally if rain is forecast. Does not protect against acidic aggression. 

      Shipping & Returns

      Care Instructions

      View full details