Onix-Marble
FOB XTREME - EXTREME WATER- AND OIL-REPELLENT PROTECTION
FOB XTREME - EXTREME WATER- AND OIL-REPELLENT PROTECTION
Couldn't load pickup availability
WHAT'S IT FOR
- Water- and oil-repellent: it hampers the absorption of common watery and oily stains.
- Protective base coat before waxing interior surfaces with rustic or textured finishes.
- Excellent for the treatment of grit and coloured cement tiles.
- Natural-finish breathing protection.
ADVANTAGES
- DOES NOT ALTER ORIGINAL COLOUR AND APPEARANCE.
- DOES NOT FORM SURFACE FILM
- DOES NOT ALTER TERRACOTTA FROST RESISTANCE.
- EXCELLENT ON RUSTIC GROUND TERRACOTTA AND TUMBLED MARBLE.
- IDEAL FOR USE NEAR KITCHENS, BARBECUES AND CAR DRIVEWAYS.
- IDEAL FOR INTERIOR AND EXTERIOR SURFACES.
- THE TREATED SURFACES ARE SUITABLE FOR FOOD CONTACT.
- AN A+ CLASSIFIED PRODUCT IN ACCORDANCE WITH THE FRENCH VOC REGULATION
IDEAL FOR
- NATURAL STONE AND AGGLOMERATES
- MARBLE AND GRANITE
- CONCRETE
- TUFF
- WPC
- TERRACOTTA
- QUARRY TILES
METHOD OF USE
No dilution required: ready to use.
Application:
For materials with matt finish (indoors and outdoors):Apply the product evenly and continuously on a clean and dry surface using a brush or fleece pad, wetting the grout lines as well. Dab any excess product with a clean cloth before it dries (roughly 10-15 minutes).For glossy or brushed finishes (indoors and outdoors):Apply FOB XTREME on a clean and dry surface, wetting the material and grout lines completely using a brush or fleece pad. Before the product dries (roughly 10-15 minutes), rub the surface and remove any residues using a microfibre cloth wetted with the product. Dry the surface with a clean cloth.When requested on high-absorption materials, apply two coats of the product with an 8-hour interval in between (e.g.: highly-trafficked areas, humid areas, outdoor surfaces).To speed up the process, it is possible to treat the surface with a single-disc machine.To complete the cycle with the finish: on porous materials such as natural stone, reconstructed tiles, agglomerates and cement tiles laid in indoor environments, a finishing wax can be applied depending on the material and on the desired effect (MATT, SATIN, CLASSIC, LONGLIFE).The surface can be walked on after just 8 hours.The stain-proofing effect starts after 24 hours.Maintenance:use a diluted solution of CLEANER PRO.
COVERAGE
- Stone10/30 m²
- Terracottarustic Tuscan, polished
- 15/20 m²Terracotta
- handmadeup to 10 m²
- Concreteup to 5 m²
Shipping & Returns
Shipping & Returns
Care Instructions
Care Instructions
